Counter-UAS Solutions

Ring Series

Scalable counter-drone defense for every threat level. Three configurations, one combat-proven platform.

Choose Your Configuration

One Platform. Three Levels of Protection.

Start with the configuration that meets your current needs and upgrade as threats evolve.

Ring 3

Foundation Defense

Ring 3

Multi-constellation GNSS spoofing across GPS, GLONASS, Galileo, and BeiDou. L1 + L2/L5 frequency bands. Push-back, hold, and static modes. 1.5 km omnidirectional range. TRL-9 combat-proven.

Ring 4

Enhanced Detection

Ring 4

All Ring 3 capabilities plus passive RF detection system. AI-powered threat classification with >99.99% detection rate. 1.5 km detection range with automated response capability.

Ring 5

Complete Solution

Ring 5

Full detect-and-defeat system. All Ring 4 capabilities plus 5-band RF jamming at 47dBm per channel. Counters FPV and non-GNSS drones with integrated layered defense.

Comparison

Configuration at a Glance

Capability Ring 3 Ring 4 Ring 5
GNSS Spoofing
RF Detection -
RF Jamming - -
Threat Coverage GNSS-dependent drones GNSS drones + Early warning All drone types
Detection Range N/A Up to 1.5 km Up to 1.5 km
Mitigation Range 1.5 km 1.5 km Up to 1.5 km
Weight 7 kg 7 kg 30 kg
Power Consumption 60W 60W 700W + 60W
Automated Operation Optional
Best For Basic protection Enhanced awareness Complete defense

Scalable Protection

Future-Proof Your Investment

Start with the configuration that meets your current needs and upgrade as threats evolve. Software upgrades and hardware add-ons available for seamless capability expansion.

3

Ring 3

GNSS Spoofing Foundation

4

Ring 4

+ RF Detection & Classification

5

Ring 5

+ Datalink Jamming & Full Defeat

Specifications

Built for the Field

Environmental

IP67 ingress protection. Operating temperature -40°C to +50°C. MIL-STD compliant. 30,000 hours MTBF.

Integration

JSON-based API. Regulus C2 software. Third-party integration support. Network deployment ready.

MIL-STD Compliance

MIL-STD-461E (EMC), MIL-STD-810G (Environmental), MIL-STD-1275E (Power), MIL-DTL-38999-III (Connectors).

Deployment Options

Stationary installation, vehicle-mounted, naval vessels, portable manpack configuration with battery operation.

Ring 4 Capability

RF Detection

AI-powered passive drone detection. 99.99% detection rate. Complete stealth operation.

>99.99%
Detection Rate
1.5 km
Detection Range
7 sec
Full Spectrum Scan
10+
Simultaneous Threats

Multi-Frequency Coverage

Comprehensive monitoring across 433MHz, 868MHz, 915MHz, 2.4GHz, 5.2GHz, and 5.8GHz bands for complete spectrum awareness.

AI-Powered Classification

Advanced machine learning algorithms provide real-time drone identification and classification with continuous improvement capabilities.

100% Passive Operation

Completely undetectable by counter-surveillance equipment. Zero RF emissions maintain full operational security.

Rapid Threat Assessment

Complete spectrum scan in 7 seconds with simultaneous tracking of 10+ threats for comprehensive situational awareness.

70+ Drone Protocols Detected

DJI Protocols

OcuSync 1/2/3/4 OcuSync Enterprise Lightbridge 1/2 Enhanced WiFi FPV OcuSync

Commercial Protocols

Autel SkyLink 1/2/3 Parrot WiFi Skydio WiFi Yuneec WiFi

RC & FPV Protocols

CrossFire ELRS FrSky ACCST/ACCESS Futaba FHSS/T-FHSS Analog Video (NTSC/PAL) HDZero WalkSnail

DIY & Other Protocols

MAVLink 1/2 DragonLink 3DR RFD900 802.15.4 DigiMesh
SpecificationDetails
Detection Frequencies433MHz, 868MHz, 915MHz, 2.4GHz, 5.2GHz, 5.8GHz
Detection RangeUp to 1.5 km (optimal conditions)
Scanning Time~7 seconds (full spectrum)
RX Sensitivity-90 dBm
Detection Rate>99.99% (single scan cycle)
False Alarm Rate1 per 24-hour period
Simultaneous Threats10+ concurrent detections
Detection TechnologyAI-based algorithms + Classical pattern recognition
Operation Mode100% Passive (no RF emissions)
IntegrationSeamless with Ring GNSS Spoofer & LeC2

Optional Add-On

Ring XLR

Dual-channel RF power amplifier for extended GNSS spoofing standoff distance. Add to any Ring 3, 4, or 5 configuration.

47 dBm
Max Output / Channel
2
RF Channels
20 km
Range
11 kg
System Weight
30,000
Hours MTBF

Dual-Channel Amplification

Connects to Ring Main Unit TX1/TX2 and amplifies both channels. Channel 1 supports GNSS L1; Channel 2 supports GNSS L2 and L5.

Seamless Integration

Controlled via the same Ring GUI. No additional operator interface required. Supports Ring 3, Ring 4, and Ring 5 configurations.

Field-Ready Design

Standalone IP67 enclosure rated for -40°C to +50°C including direct sun. MIL-STD compliant connectors and power handling.

Flexible Antennas

Omnidirectional (2 dBic) or directional horn/log-periodic (12 dBic, 12° coverage) antenna options for mission-specific configurations.

SpecificationDetails
RF Channels2 (TX1 / TX2)
Band AllocationCh1: GNSS L1 • Ch2: GNSS L2 & L5
RF Input2 x SMA, 0-25 dBm typical, 50Ω
RF Output2 x N-Type, up to 47 dBm/channel, 50Ω
Antenna OptionsOmni (2 dBic) or Directional (12 dBic, 12°)
Dimensions440 x 296 x 127 mm
Weight11 kg
EnvironmentalIP67, -40°C to +50°C
Power18-32 VDC, 400W max
NetworkingEthernet via MIL-DTL-38999-III
MTBF30,000 hours
ComplianceMIL-STD-461E, MIL-STD-810G, MIL-STD-1275E

Ready to Secure Your Airspace?

Contact our team to discuss which Ring configuration best meets your operational requirements.